Drum tongs for use with overhead lifting gear or fork lift adaptor beam. Test certificate supplied.

Two models of horizontal tongs, one with locking lever, are for lifting 210 litre tight head steel drums up to a capacity of 500Kgs with length of 760 - 910mm. Vertical drum tongs are for 210 litre open top and tight head steel drums with L or XL rings, capacity up to 360Kgs.

Drum pincer for lifting 210 litre open top and tight head steel drums with capacity up to 500Kgs. All steel construction. Test certificate supplied.

Fitted with 20mm steel pin for attaching to overhead lifting gear or fork lift adaptor beam. The claw grips climb of drum and the vertical bar keeps the drum steady.

Forklift adaptor beams are available for use with this item - see below.

Use your forklift as a mobile crane. The beam has a forged steel shackle with swivel hook for use with drum handling attachments and other secure lifting jobs. Test certificate supplied.

Thre models available with capacity of 500Kgs, 1000Kgs or 2000Kgs. Available with orange or yellow epoxy finish.

Clamps for lifting 210 litre steel drums with rolling hoops. The clamp unit fits over forks and is secured by T-Bar clamping screws.

The 2 drum fingers have adjusting bolts fitted underneath to enable the fingers to be adjusted parallel. The clamp is located with jaws under the drum's top rolling hoop. Jaws automatically open and close as drum is raised and lowered.

Models available for one or two drums.

Designed for 210 litre "L", "XL" & Mauser-style plastic drums having plastic lip of 5mm minimum. 3 models available - 1 for 572mm diameter drums, 1 for 523mm diameter drums and 3rd that adjusts for both sizes.

The clamp fits over forks and is secured by T-Bar clamping screws. Jaws automatically open and close as drum is raised and lowered.

Fork truck attachment for transporting 210 litre open top and tight head steel drums in the horizontal position.

Fits over forks, secured by T-Bar clamping screws. Orange or yellow epoxy finish. Test certificate supplied.

Designed for transporting 210 litre tight head steel drums in the upright position. The claw fits over forks and is secured by T-Bar clamping screws.

Spring loaded hardened steel jaws grip the climb or rim of the drum whilst the curved rear support holds the drum steady and prevents rolling movement.

Two models are available MDC11 provides a single claw with maximum capacity of 250Kgs. MDC-PB2 is a double claw unit with capacity of 1000Kgs. Test certificates supplied.

Fork lift mounted drum trnasporter and rotator for 210 litre steel and plastic drums. Fits over forks and is secured by T-Bar clamping screws.

Rotates drums through full 360 degrees. Drum is held securely in 200mm wide steel girdle harness with 2 ratchet clamps.

Capacity is 360Kgs for steel drums, 250Kgs for plastic. Test certificate supplied. Orange or yellow epoxy finish.