Standard Workbenches 300Kg (B)

Medium duty steel framed workbenches with 300Kgs capacity, traditional square 4 leg frame design. 

Fully welded steel, 32 x 32mm legs, 50 x 25mm and 25 x 25mm cross members. 

Frame finished in light grey epoxy.

Standard height 840mm. 750mm and 900mm height available at no extra cost. 

Choose the worktop size and height and add any extra components your require, the Workbench builder will update your total automatically

Workbech ONLY - Laminate & Steel 3-5 Days Others 15-20 Working Days
Workbench 300Kg - Choose Size and Worktop
Workbench 300Kg - Choose Size and Worktop

Choose Workbench Size and Worktoptop

9 worktop sizes. 

Worktops available in laminate, vinyl, MDF, steel and stainless steel.

Standard height 840mm. Optional 750mm and 900mm height available at no extra cost. 

Add LOWER SHELF
Add LOWER SHELF

Add a Lower Shelf

Choose from: Laminate, MDF or Vinyl

Full depth lower shelf, factory fitted only.

Please ensure the size you select matches the size of the workbench ordered.

 

Add RETAINING EDGE - REAR AND SIDES
Add RETAINING EDGE - REAR AND SIDES

Add a Retaining Skirt

Optional Retaining Skirt - 100mm High Steel - 2 Ends & Back

Add REAR SERVICE DUCT
Add REAR SERVICE DUCT

Add a Rear Service Duct

Rear service duct complete with 2 x 13amp twin sockets (not wired).

Please ensure the size you select matches the size of the workbench ordered.

Add DOOR/DRAWER UNITS - FIT LEFT SIDE
Add DOOR/DRAWER UNITS - FIT LEFT SIDE

Add Door and Drawer Units to be fitted to the LEFT hand side of the workbench.

Choose from:

  • Single Drawer
  • Two Drawer
  • Three Drawer
  • Four Drawer
  • Small Cupboard
  • Cupboard and Single Drawer
  • Large Cupboard

Door/Drawer Fronts Availabe in Blue, Red or Dark Grey

Add DOOR/DRAWER UNITS - FIT RIGHT SIDE
Add DOOR/DRAWER UNITS - FIT RIGHT SIDE

Add Door and Drawer Units to be fitted to the RIGHT hand side of the workbench.

Choose from:

  • Single Drawer
  • Two Drawer
  • Three Drawer
  • Four Drawer
  • Small Cupboard
  • Cupboard and Single Drawer
  • Large Cupboard

Door/Drawer Fronts Availabe in Blue, Red or Dark Grey

Add DRAWER INSERTS
Add DRAWER INSERTS

Choose from a range of Drawer Inserts

4 sizes to choose from.

Add MOUNTING POSTS For above bench Accessories
Add MOUNTING POSTS For above bench Accessories

Short Mounting Posts

Short extension posts required for above bench accessories.

Required to fit: Louvre, Tool, Multi & Tiltbin Back Panels (RLP4/5/6, RTP4/5/6, RMP4/5/6 & RMTP4/5/6)


Tall Mounting Posts

Tall extension posts required for above bench accessories.

Required to fit, Top Light Frame TFL4/5/6 & Top Steel Shelf TSS4/5/6

Note* Short extension posts are not required if ordering Tall extension posts

Add REAR TOOL PANEL
Add REAR TOOL PANEL

Add a Rear Tool Panel

Choose from:

  • Rear tool panel complete with paper clip.
  • Rear louvre panel complete with papers clip.
  • Rear mutli panel (tool & louvre) complete with papers clip.
  • Rear mutli panel (tool & tiltbin) complete with papers clip.
Requires a minium of Short Mounting Posts

Add TOP SHELF
Add TOP SHELF

Add a Top Shelf

Steel top shelf unit.

290mm deep, capacity 50kg

Requires Tall Mounting Posts

Add TOP FRAME AND LIGHT
Add TOP FRAME AND LIGHT

Top Light Frame

Top light frame complete with fluorescent single tube fitting and diffuser. (No Wiring)

Tube length mm: TFL4 - 610mm - TFL5 - 1220mm - TFL6 - 1220mm

Requires Tall Mounting Posts.

Back to Build A Workbench
Secure Payments SagePay Credit Card Payments
Get In Touch

Seltek Warehouse
Unit 3 - Deeping Gate
Stonebridge
Milton Keynes MK13 0DE

Telephone: +44 (0) 1908 320 731
Fax: +44 (0) 1604 422 900
Customer.service@seltekwarehouse.co.uk

Invotec Solutions