Description

The Oilzone mat from Seltek Warehouse is a high quality anti fatigue mat perfect for use in environments where oil and chemicals are in frequent use.

Made of 100% nitrile rubber with an open cell structure, raised studs and allow swarf and fluids to drain away leaving a safe comfortable work surface.

Highly visible orange bevel edges on 3 sides of the mat provide added safety.

Why Anti-Fatigue Mats?

Standing for long periods of time on cold, hard floors causes general fatigue plus a host of other health complaints. These conditions, coupled with slips, trips and falls lead to decreased productivity, absenteeism and ultimately cost employers millions each year.

Samples and Help

For the majority of our mats we are happy to send you up to 3 samples of our matting or for larger installations we can arrange to attend for a site survey, please contact us for further details.

Why Buy?

• High quality anti-fatigue duckboard matting for wet or dry industrial use.
• Made from 100% nitrile rubber, designed to withstand industrial oils and harsh chemicals.
• Drainage holes and raised studs allow fluids and debris to fall through, leaving a clear top surface.
• Aggressive slip resistant surface.
• Highly visible orange bevelled borders on three sides for safety.
• Can be simply cleaned with detergent or water-jet.
• Overall height 22mm.

Features

Use – Dry/Wet Areas
Heavy duty
Resists Oils & Chemicals
Impact Resistant
Wear Resistance (Level 3)
Anti-Fatigue Rating (Level 3)
Slip Resistance (Level 3)

Level Testing 1(Good) 2(Better) 3(Best)

Wear Resistance – ASTM D3844-92. An accelerated wear test whereby total loss of material weight is measured when subjected to 5000 cycles under an abrasive wheel.
Anti-Fatigue Rating – ASTM D3574. This is a simple deflection/compression test which gives a rating depending on the difference in height of a mat before and during the time a weight has been placed on it. The greater the difference, the better the antifatigue properties and overall product performance.
Slip Resistance – ASTM C1028-89 & DIN-E-51130, 51097. These tests measure the force required to cause slippage of a local load across the surface of the material. The coefficient of friction ratio is the force divided by the weight. The higher the performance icon, the greater the coefficient of friction ratio, thus the greater the
slip resistance of the mat.